TCSHAB - TCS Series

シリーズ: TCS
お問い合わせ: Contact Littelfuse Support
外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The TCS Series is a low cost method of go/no go current detection. It includes a solid-state output to sink or source current when connected directly to a standard PLC digital input module. Its normally open or normally closed output can also be used to control relays, lamps, valves, and small heaters rated up to 1A steady, 10A inrush. The TCS is self-powered (no external power required to operate the unit) and available with an adjustable actuation range of 2 - 20A or factory fixed actuation points from 2 - 45A.


動作
Normally Open: When a current equal to or greater than the actuate current is passed through the toroidal sensor, the output closes. When the current is reduced to 95% of the actuate current or less, the output opens.
Normally Closed: When the current through the toroid is equal to or greater than the actuate current, the output opens. When the current is reduced below 95% of the actuate current, the output closes. To increase sensitivity, multiple turns may be made through the TCS’s toroidal sensor. The trip point range is divided by the number of turns through the toroidal sensor to create a new range. When using an external CT, select a 2VA, 0-20A output CT rated for the current to be monitored. Select TCS adjustment range 0. Pass one secondary wire lead through the TCS’ toroid and connect the secondary leads together.

Property (Mouseover for details) Value
Output Voltage 24 - 240 Vac; +10 / -20%
Output Voltage Drop (V) ≅2.5
Output Type Solid state
Output Form NC
Output Load Rating (VA) Steady state: 1 A; Inrush: 10 A
Response Time (ms) Overcurrent: ≤200 ms; Undercurrent: ≤1 s
Sensor Type Toroid; through hole wiring; alternating current; monitored wire must be properly insulated
Current Sensor Range 2 - 20 A adjustable guaranteed range; Steady - 50 A turns; Reset: ≅95% of the actuate current; Maximum: Steady - 50 A turns; Inrush - 300 A turns for 10 s
Sensor Hole Size 0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire
Insulation Resistance ≥100
Dielectric Breakdown ≥2000 terminals to mounting surface
Burden (VA) ≤0.5
Termination Type 0.25 in. (6.3 mm) male quick connect terminals
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature -20° to 60°C (-4° to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% non-condensing
Dimensions 2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。