TCS シリーズ - 電流センサー

シリーズ： TCS
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください（自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません）。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The TCS Series is a low cost method of go/no go current detection. It includes a solid-state output to sink or source current when connected directly to a standard PLC digital input module. Its normally open or normally closed output can also be used to control relays, lamps, valves, and small heaters rated up to 1A steady, 10A inrush. The TCS is self-powered (no external power required to operate the unit) and available with an adjustable actuation range of 2 - 20A or factory fixed actuation points from 2 - 45A.


動作
Normally Open: When a current equal to or greater than the actuate current is passed through the toroidal sensor, the output closes. When the current is reduced to 95% of the actuate current or less, the output opens.
Normally Closed: When the current through the toroid is equal to or greater than the actuate current, the output opens. When the current is reduced below 95% of the actuate current, the output closes. To increase sensitivity, multiple turns may be made through the TCS’s toroidal sensor. The trip point range is divided by the number of turns through the toroidal sensor to create a new range. When using an external CT, select a 2VA, 0-20A output CT rated for the current to be monitored. Select TCS adjustment range 0. Pass one secondary wire lead through the TCS’ toroid and connect the secondary leads together.

製品関連文書

技術的なご質問

お電話（+1 800-832-3873 ）または Eメール（relays@littelfuse.com）にてお問い合わせください。 

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Output VoltageOutput
Form		Termination TypeMounting MethodDimensionsWeight (lbs/g)Burden (VA)Dielectric BreakdownHumidityInsulation ResistanceOutput Load Rating (VA)Output TypeOutput Voltage Drop (V)Response Time (ms)Sensor Hole SizeStockSamplesCompare
カタログ番号Output Voltage出力
フォーム		端子タイプ取付け方式寸法重量 (ポンド / g)Burden (VA)Dielectric Breakdown湿度Insulation ResistanceOutput Load Rating (VA)出力タイプOutput Voltage Drop (V)応答時間（ms）センサー穴サイズ在庫サンプル比較する
TCSG2A 3 - 50 Vdcなし0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅1.2Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSGAA 3 - 50 Vdcなし0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅1.2Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSGAB 3 - 50 VdcNC0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅1.2Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSH2A 24 - 240 Vac; +10 / -20%なし0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅2.5Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSH2B 24 - 240 Vac; +10 / -20%NC0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅2.5Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSHAA 24 - 240 Vac; +10 / -20%なし0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅2.5Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSHAB 24 - 240 Vac; +10 / -20%NC0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅2.5Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認 Order
TCSH5B
製造中止：2020 -10-07		24 - 240 Vac; +10 / -20%NC0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.75 D in. (50.8 x 50.8 x 44.5 mm)0 Kg≤0.5≥2000 terminals to mounting surface95% non-condensing≥100Steady state: 1 A; Inrush: 10 ASolid state≅2.5Overcurrent: ≤200 ms; Undercurrent: ≤1 s0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm²) THHN wire確認
品番 部品名 RoHS 鉛フリー RoHS (2015/ 863/EU) 認証 REACH (SVHC) 適合証明書 ハロゲンフリー REACH (SVHC) IPC 材料宣誓書
TCSH2A CURRENT SENSOR なし 10/16/2018 なし 10/16/2018 CoC_RoHS9_TCSH2A REACH211_Declaration_(Contain)_TCSH2A あり
10/16/2018		 内容
TCSHAA CURRENT SENSOR なし 08/27/2021 なし 08/27/2021 CoC_RoHS9_TCSHAA REACH211_Declaration_(Contain)_TCSHAA あり
08/27/2021		 内容
お探しの製品環境情報がこのタブ内にない場合は、
製品環境情報リクエストフォームにてご請求ください。