電流監視リレー変換器


CP データシートシリーズ詳細サンプルのご注文 The CP-5 is an undercurrent monitor designed to monitor one leg of a 3-phase system. It is commonly ...More 入力 Voltage (V): 115 Vac, 480 Vac 出力 Form: SPDT Termination Type: 7 in.-lbs. 12 - 18 AWG	DCSA データシートシリーズ詳細サンプルのご注文 The DCSA Series is a loop-powered, linear output current transducer that provides an output that is ...詳細 Output Voltage: 10 - 30 Vdc Termination Type: Wire clamp for 22-14 AWG (0.336mm²-2.5mm²) Mounting Method: DIN 1 and DIN 3 rail mounting	ECS データシートシリーズ詳細サンプルのご注文 The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensin...詳細入力 Voltage (V): 120 Vac, 230 Vac, 24 Vac, 24 Vdc, 120VAC, 24VDC 出力 Form: Isolated SPDT, Isolated SPDT Termination Type: 0.25 in. (6.35 mm) male quick connect terminals (5), 0.25 in. (6.35mm) male quick connect terminals (5)
ECSW データシートシリーズ詳細サンプルのご注文 The ECSW Series of single-phase, AC window, current sensors includes adjustable overcurrent and unde...詳細入力 Voltage (V): 120 Vac, 230 Vac, 24 Vdc, 120VAC 出力 Form: Isolated SPDT, Isolated SPDT Time Delay Range: 0.15 - 7 s adjustable, 0.5 - 50 s adjustable, 0.5 - 50s adjustable	LCS データシートシリーズ詳細サンプルのご注文 The LCS10T12 connected to the LPM12 or LPMG12 indicator is a low cost, easy to use, go/no-go indicat...詳細 Termination Type: 12 in. (30.4 cm) wire leads 重量（lbs/g）： 0 Kg Burden (VA): ≤0.5	LCSC データシートシリーズ詳細サンプルのご注文 The LCSC10T12 is a toroidal current sensor for use with the DCSA Series current transducer. See data...More 重量（lbs/g）： 0 Kg Burden (VA): ≤0.5 Input AC Line Frequency (Hz): 0 - 20 A: 20 / 100 Hz; 21 - 50 A: 30 / 100 Hz
LSR データシートシリーズ詳細サンプルのご注文 The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that...詳細 Termination Type: Torque: 7 in.-lbs.; Wire: 12 - 24 AWG Mounting Method: Four #6 screws 3/4 in in length Dimensions: 1.67 H x 2.3 W x 3.56 D in. (42.4 x 58.4 x 90.4 mm)	LSR_XXX データシートシリーズ詳細サンプルのご注文 The LSR-XXX load sensors use current levels to determine feed rates, tool wear, loss of prime on pum...詳細入力 Voltage (V): 115 Vac, 230 Vac, 24 Vac 出力 Form: SPDT Termination Type: Torque: 7 in.-lbs.; Wire: 12 - 24 AWG	LSRU データシートシリーズ詳細サンプルのご注文 Load sensor 入力 Voltage (V): 18 - 30 Vac 出力 Form: SPDT Termination Type: Torque: 7 in.-lbs.; Wire: 12 - 24 AWG
LSRX データシートシリーズ詳細サンプルのご注文 The LSRX/LSRX-C Series are AC current sensors designed to energize the output contact whenever 4.5 A...詳細出力 Form: SPST - Form A Termination Type: Torque: 3 in.-lbs.; Wire: 12 - 26 AWG; 0.25 in quick-connect fast-on terminals, Torque: 3 in.-lbs.; Wire: 12 - 26 AWG; Depluggable screw terminals Mounting Method: Surface mount	TCS データシートシリーズ詳細サンプルのご注文 The TCS Series is a low cost method of go/no go current detection. It includes a solid-state output ...詳細 Output Voltage: 24 - 240 Vac; +10 / -20%, 3 - 50 Vdc 出力 Form: NC, NO Termination Type: 0.25 in. (6.3 mm) male quick connect terminals	TCSA データシートシリーズ詳細サンプルのご注文 The TCSA Series is a loop-powered, linear output current transducer that provides an output that is ...詳細 Output Voltage: 10 - 30 Vdc Termination Type: 0.25 in. (6.3 mm) male quick connect terminals Mounting Method: Surface mount with one #10 (M5 x 0.8) screw