DCSA シリーズ - Current Transducers

シリーズ: DCSA
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails.


See datasheet for operation details.

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Output VoltageTermination TypeMounting MethodWeight (lbs/g)Dielectric BreakdownHumidityInsulation ResistanceMomentary Output Voltage (V)Output RangeOutput TypePolarityRepeat Accuracy (%)Response Time (ms)Current Sensor RangeStorage Temperature (F/C)StockSamplesCompare
カタログ番号Output Voltage端子タイプ取付け方式重量 (ポンド / g)Dielectric Breakdown湿度Insulation ResistanceMomentary Output Voltage (V)Output Range出力タイプ極性Repeat Accuracy (%)応答時間(ms)Current Sensor Range保管温度 (F/C)在庫サンプル比較する
DCSA20 10 - 30 VdcWire clamp for 22-14 AWG (0.336mm²-2.5mm²)DIN 1 and DIN 3 rail mounting0 Kg≥2500 terminals to mounting surface95% non-condensing≥10040 for 1 m4 - 20 mA or 1 to 5 Vdc or 2 to 10 VdcAnalog current directly proportional to input currentUnits are reverse polarity protected±0.25% of full scale under fixed conditions≅300 ms0 - 20 mA ac; factory calibrated to ±0.5% of full scale-40° to 85°C (-40° to 185°F)確認 Order
DCSA5 0 Kg確認 Order
DCSA50 10 - 30 VdcWire clamp for 22-14 AWG (0.336mm²-2.5mm²)DIN 1 and DIN 3 rail mounting0 Kg≥2500 terminals to mounting surface95% non-condensing≥10040 for 1 m4 - 20 mA or 1 to 5 Vdc or 2 to 10 VdcAnalog current directly proportional to input currentUnits are reverse polarity protected±0.25% of full scale under fixed conditions≅300 ms0 - 20 mA ac; factory calibrated to ±0.5% of full scale-40° to 85°C (-40° to 185°F)確認 Order
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。