ソフトウェア

Motor and Feeder Protection
SE-Comm-RIS v3.9
This program gives remote access to metering, control, data logging, and programming features on the MPS, MPU-32, FPS, and the FPU-32. Set points can be accessed individually or downloaded as a file. Metered data can be observed on a single screen. Logged data can be downloaded and saved on a computer. Protective curves can be plotted. Version 3.6 is required for use with the FPS Feeder Protection System.
SE-COMM16 v1.54a
The SE-COMM16 communications software enables the user to communicate with the MPU-16A, FPU-16, and LP2000, and includes the Allen Bradley DF1 and Modbus RTU protocols. This version also includes support for data logging.
SE-PLOT
SE-Plot functionality is now included in SE-Comm-RIS.
中性点接地抵抗器モニター
SE-MON330 v3.3
このソフトウェアは、SE-330、SE-330AU、SE-330HV 中性点接地抵抗器モニターからのデータ受信に使用されます。リレーの設定値および測定値を表示します。このソフトウェアでは、ログ間隔を選択して情報を記録することができます。SE-MON330 には、SE-325、SE-330、SE-330AU、SE-330HV 中性点接地抵抗器モニターの推奨設定値を提供する NGR モニター設定値アシスタント機能が含まれています。バージョン 2.2 では、ファームウェアバージョン 10 以降を搭載する SE-330 ユニットの 10 件のイベントデータログを表示することができます。
垂下ケーブル保護
SE-MON-GFGC
このプログラムは、SE-145 地絡接地チェックモニターからのデータ受信に使用されます。
Temperature Monitoring
SE-Comm-RTD
このプログラムは、63 SIO-RTD までのモジュールと通信するために使用されます。4-20mA または複数ある RTD タイプのいずれかの SIO-RTD モジュールで入力を構成するために使用できます。収集されたデータはエクスポートできます。ソフトウェアには自動起動機能があり、コンピュータが再起動した際プログラムも再起動するようになっています。SE-Comm-RTD は現在、最大 8 つの入力信号のプロットを行います。

Littelfuse Startco SE-Flash Firmware Upgrade Software
Download SE-Flash v2.00
SE-Flash is used to update the firmware in the EL731, MPU-32, FPU-32, MPS and SE-330, and for the communications module in the MPU-16A and FPU-16. An RS-232-to-RS-485 converter is required for FPS and MPS updates; a CA-945 adapter may be required for FPU-32 and MPU-32 updates; an AC700-CUA-00 Firmware Upgrade Module is required for the EL731; and a 9-pin serial cable is required for SE-330 firmware updates. For many PC’s, a USB-to-RS-232 adapter will also be needed.

• EL731 Flash Update Instructions
• MPS Flash-Update Instructions
• MPU-32 Flash-Update Instructions
• SE-330 Flash Update Instructions