TA12D2 - TA Series

シリーズ: TA
お問い合わせ: Contact Littelfuse Support
外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The TA Series prevents rapid recycling of a compressor. A lockout delay is started when the thermostat opens, or input voltage is lost. Eliminates tripped circuit breakers or blown fuses caused by a locked rotor during short cycling. The TA will not allow the compressor to start when the line voltage is low. Chatter of the compressor relay is eliminated. Because of the fast initiate time, bounce of the thermostat will not be transmitted to the compressor relay coil. A 30 second delay provides anti-reversing protection for scroll compressors.


Operation (Lockout)
On initial closure of the S1, the compressor relay energizes immediately. When S1 opens or input voltage is interrupted, a lockout time delay is initiated. During this lockout time delay, the compressor relay cannot be energized. The low voltage (brownout) protection prevents energization of the compressor when the line voltage is low.
Reset: The lockout time delay cannot be reset. After the time delay is completed, the unit automatically resets.

Property (Mouseover for details) Value
Input Voltage (V) 12 V dc
Input Impedance (Ohms) 450 (anticipator by-pass)
Output Load Rating (VA) 1 A @ 60°C
Minimum Output Load Current (A) 75
Output Voltage Drop (V) ≤1.25 V
Time Delay Tolerance (%) -15% - 35%
Lockout and Random Start Delays 2 m fixed
Initiate Time (ms) ≌16
Thermostat Anticipator Resistor (Ohms) Anticipator resistor: ≥1800
Undervoltage Trip Voltage ≅9
Insulation Resistance ≥100
Dielectric Breakdown ≥2000V terminals to mounting surface
Circuitry Encapsulated
Termination Type 0.25 in. (6.35 mm) male quick connect terminals
Mounting Method Surface mount with 1 #10 (M5 x 0.8) screw
Operating Temperature -40° to 70°C (-40° to 158°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% relative : non-condensing
Dimensions 2 H x 2 W in. (50.8 x 50.8 mm)
Weight (lbs/g) 0 Kg
Dimensions 2 H x 2 W in. (50.8 x 50.8 mm)
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。