免責事項
リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。
The 601 series is a fully-programmable voltage monitor designed to protect three-phase motors from loss of any phase (single-phasing), phase reversal, low- or high-voltage, voltage unbalance, low- or high-frequency, and rapid cycling. When a harmful condition is detected, the 601's output relay is deactivated after the specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for the programmed restart delay (RD2). This monitor can be used as a stand-alone product or networked with an RM-1000, RM-2000, PLC, computer, or SCADA system.
Eleven setpoints are viewable with the three-digit LED display or from a networked device:
- low voltage
- high voltage
- voltage unbalance
- low frequency
- high frequency
- RS485 address
- trip delay for voltage/frequency faults
- trip delay for single-phase faults
- rapid-cycle timer (RD1)
- restart delay after all faults (RD2)
- type of restart after all faults (manual or automatic)
Six parameters are viewable while the motor is running:
- L1-L2 voltage
- L2-L3 voltage
- L1-L3 voltage
- average voltage
- voltage unbalance (%)
- frequency
When used with the RS485MS-2W communications module, the 601 can communicate with most Modbus RTU master devices. Voltage conditions can be monitored and setpoints can be changed remotely using Solutions software, an RM1000, RM2000, or other device.
特長:
- 表示器内蔵
- Programmable voltage and frequency settings
- Two programmable restart delay timers
- Two programmable trip delay timers
- Programmable restart control
- フレキシブルリセット
- リモートディスプレイ対応
- Network communications capability