HLVA6I23 - HLVA Series – Voltage Monitor Series

シリーズ: HLVA Series – Voltage Monitor
お問い合わせ: Contact Littelfuse Support
外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The HLV Series is a single-phase undervoltage monitor designed to protect sensitive equipment from brownout or undervoltage conditions. Time delays are included to prevent nuisance tripping and short cycling. The 30A, 1hp rated, SPDT relay contacts allow direct control of motors, solenoids and valves. The output relay can be ordered with isolated SPDT contact to allow monitoring of one voltage and switching a separate voltage. Two undervoltage trip point ranges allow monitoring of 110 to 120VAC or 208 to 240VAC systems.


動作
Upon application of input voltage the output relay remains de-energized. When the input voltage value is above the pull-in voltage, the restart delay begins. At the end of the restart delay, the output relay energizes. When the input voltage falls below the trip point, the trip delay begins. If the input voltage remains below the pull-in voltage for the entire trip delay the relay deenergizes. If the input voltage returns to a value above the pull-in voltage, during the trip delay, the trip delay is reset and the relay remains energized. If the input voltage falls below the trip point voltage during the restart delay, the delay is reset and the relay remains de-energized. Reset is automatic upon correction of an undervoltage fault.
Reset: Removing input voltage resets the output relay and the time delays.

Property (Mouseover for details) Value
Input Voltage (V) Min RMS Voltage: 70 Vac; Max RMS Voltage: 264 Vac
Input AC Line Frequency (Hz) 50 / 60
Output Type Electromechanical relay
Output Form Isolated SPDT
Output Load Rating (VA) General Purpose: SPDT-NO: 125/240 Vac 30 A; SPDT-NC 15 A; Resistive: SPDT-NO: 125/240 Vac 30 A; 28 Vdc 20 A; SPDT-NC: 125/240 Vac 15 A; 28 Vdc 10 A; Motor Load: SPDT-NO: 125 Vac 1 hp; 240 Vac 2 hp; SPDT-NC: 125 Vac 1/4 hp; 240 Vac 1 hp
Time Delay Tolerance (%) ≤±5%
Reset Time (ms) ≤150 ms
Restart Delay Range 3 - 300 s adjustable
Repeat Accuracy (%) ±0.5% or 20 ms whichever is greater
Trip Delay Range 3 s
Trip Point Accuracy (%) ±3% of trip point
Undervoltage Sensing Range (V) Peak voltage sensing; 170 - 220 Vac
Power Consumption ≤4 VA
Pull In Voltage (V) 105% or trip point voltage
Insulation Resistance ≥100
Surge Protection IEEE C62.41-1991 Level A
Termination Type 0.25 in. (6.3 mm) male quick connect terminals
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature -40° to 60°C (-40° to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% non-condensing
Dimensions 3 H x 2 W x 1.5 D in. (76.7 x 50.8 x 38.1 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。