455 シリーズ - 3-Phase Voltage/Phase Monitor

シリーズ: 455
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大

The 455 Series are 3-phase voltage monitors that combine load and line side monitoring to offer complete protection. Monitoring the load side will alert the user of contactor failure or impending contactor failure. Line side monitoring will also protect the motor from damaging fault conditions that may be present prior to the motor starting. With other line/load side monitors, the motor must be started before a voltage fault is detected. With the 455, your motor is fully protected at all times.

The 455 Series are 3-phase, dual range voltage monitors that protect 190-480VAC, 50*/60Hz motors, regardless of their size. It automatically selects between the 200V and 400V range when the user selects the nominal voltage setpoint. Other adjustments include a 2-30 second trip delay, a 2-300 second restart delay (and manual restart) and a voltage unbalance trip point of 2-8%. The voltage monitor's circuitry is powered through the line side connections, so there is no need for separate control power, making it easy to install.

Equipped with an infrared LED, the 455 Sereies can communicate to the optional hand-held diagnostic tool, Informer-MS to obtain valuable information such as real-time voltage, voltage unbalance on both line and load sides, motor run hours, last 20 faults, last 32 motor starts, high and low voltage trip points, voltage unbalance trip

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Overvoltage Reset Voltage (%)Overvoltage Trip Voltage (%)Repeat Accuracy (%)Restart Delay RangeStorage Temperature (F/C)Trip Delay RangeStockCompare
カタログ番号入力
電圧 (V)
出力
フォーム
端子タイプ取付け方式寸法重量 (ポンド / g)Input AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Overvoltage Reset Voltage (%)Overvoltage Trip Voltage (%)Repeat Accuracy (%)Restart Delay Range保管温度 (F/C)Trip Delay Range在庫比較する
455 190 - 480 VacSPDTTorque: 7 in-lbs; Wire Size: 12 - 18 AWG#8 screws2.93 H x 5.27 W x 2.95 D in. (74.4 x 133.9 x 74.9 mm)0 Lb50 / 60 (50 will increase all delay timers by 20%)6Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A107%110%±0.1%Manual; 2 - 300 s adjustable-40° to 80°C (-40° to 176°F)Under/Over and Unbalance Voltage: 2 - 30 s adjustable; single-Phase faults (>25%UB): 2 s確認
455480R 380 - 480 VacSPDTTorque: 7 in-lbs; Wire Size: 12 - 18 AWG#8 screws2.93 H x 5.27 W x 2.95 D in. (74.4 x 133.9 x 74.9 mm)0 Kg50 / 60 (50 will increase all delay timers by 20%)6Pilot Duty: 470 VA @ 600 Vac107%110%±0.1%Manual; 2 - 300 s adjustable-40° to 80°C (-40° to 176°F)Under/Over and Unbalance Voltage: 2 - 30 s adjustable; single-Phase faults (>25%UB): 2 s確認
455575 475 - 600 VacSPDTTorque: 7 in-lbs; Wire Size: 12 - 18 AWG#8 screws2.93 H x 5.27 W x 2.95 D in. (74.4 x 133.9 x 74.9 mm)0 Kg50 / 60 (50 will increase all delay timers by 20%)6Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A107%110%±0.1%Manual; 2 - 300 s adjustable-40° to 80°C (-40° to 176°F)Under/Over and Unbalance Voltage: 2 - 30 s adjustable; single-Phase faults (>25%UB): 2 s確認
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。