201 Pump Controls シリーズ - Single-Channel Seal-Leak Detector

シリーズ: 201 Pump Controls
リテルヒューズ サポートへのお問い合わせ
The model 201-100-SLD is an 8-pin plug-in style seal-leak detector to sense seal failures on submersible pumps. A microcontroller-based relay that monitors the shaft seal of a submersible pump motor. A resistive probe is installed in the seal cavity. If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity setpoint, the unit will trip and the relay contacts will change state. The unit will automatically reset when a fault is cleared.


Catalog #Input
Voltage (V)
Termination TypeMounting MethodDimensionsWeight (lbs/g)HumidityInput AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Protection ClassSense VoltageSensitivity (Ohms)Storage Temperature (F/C)Stock
電圧 (V)
端子タイプ取付け方式寸法重量 (ポンド / g)湿度Input AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Protection ClassSense Voltage感度(オーム)保管温度 (F/C)在庫
201-100-SLD 110 - 120 Vac nominalSPDTTorque (OT08-PC octal socket): 6 in-lbs; Wire: Stranded or solid 10 - 22 AWGDIN rail or surface mount (plug into OT08-PC socket)1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm)0 Kg10 - 95% non-condensing per IEC 68-2-350 / 605Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A @ 240 VacNEMA 15 Vdc pulsed (probe)4.7 - 100-40° to 80°C (-40° to 176°F)確認