免責事項
リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください（自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません）。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。
The PumpSaver® Plus Model 234-P protects single-phase pumps from dry-well, dead-head, rapid-cycle, jammed impellers, and over/undervoltage conditions. Typical applications include residential waterwells, commercial waterwells, irrigation wells, golf courses, and other sprinkler systems. The Model 234-P is designed to be mounted inside a Grundfos™ control box* to protect ⅓-3 hp, 2- or 3-wire, 230 V pumps. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).
A calibration adjustment allows the 234-P to be calibrated to your specific pumping applications, reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations, overcurrent, and undercurrent. When an abnormality such as loss of suction is detected, the 234-P deactivates its output relay and directly disconnects the pump motor. The 234-P then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the 234-P reactivates its output relay and turns the pump back on. By leaving the restart delay knob in the reset position, the 234-P will operate in manual reset mode.
The Informer displays parameters including calibration points, trip points, run time and last faults. An IR Kit-12 (12" fiber optic kit) allows the Informer to access these parameters even when the 234-P is enclosed in a control box. This is valuable for troubleshooting the pump while it is running.
NOTE: The PumpSaver® models have a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70% - 90% of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, increase the sensitivity closer to the 90% mark, or if you have a very heavy producing well, decrease the sensitivity around the 70% mark.
*The Model 234-P is not recommended for use with the Grundfos Deluxe Control Box.
特長：
- Proprietary microcontroller-based circuitry
- Onboard sensitivity adjustment
- Adjustable restart delay
- Built-in IR communications link
- LED 表示