ISS 102 シリーズ - Two-Channel Intrinsically Safe Switch

シリーズ: ISS 102
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable.
-LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds.
-DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds.
-MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input LogicIntrinsically Safe Circuit LocationMaximum Input PowerOutput Load Rating (VA)Sense VoltageSensitivity (Ohms)Sensor ModeStockCompare
カタログ番号入力
電圧 (V)
出力
フォーム
端子タイプ取付け方式寸法重量 (ポンド / g)Input AC Line Frequency (Hz)Input LogicIntrinsically Safe Circuit LocationMaximum Input PowerOutput Load Rating (VA)Sense Voltage感度(オーム)Sensor Mode在庫比較する
ISS-102A-LC 120 Vac nominalOne Form ATorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)4.7 - 100Differential / Latching; 1-channel or 2-channel switch確認
ISS-102AA-DCS 120 Vac2 Form ATorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)1002-channel switch確認
ISS-102ACI-MC 120 Vac nominalOne Form A and One isolated Form CTorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)4.7 - 100Differential / Latching; 1-channel or 2-channel switch確認
ISS-102C-M-LC 120 Vac nominalOne Form CTorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Division 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)100Differential / Latching; 1-channel or 2-channel switch確認
ISS-102CCI-M-MC 0 Kg確認
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。