PLMU Series – Voltage Monitor シリーズ - Littelfuse PLMU Voltage Monitoring Relays Provide Superior Protection

外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The PLMU (PLMU11) series is a three-phase voltage monitor that continuously measures the voltage of each of the three phases to provide protection for motors and sensitive loads. Its proprietary microcontroller-based circuitry senses under and overvoltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. Universal voltage operation and standard base connection allows the PLMU11 to replace hundreds of competitive part numbers.

動作

Upon application of power, a 0.6 s random start delay begins, and the PLMU11 measures the voltage levels and line frequency and then selects the voltage range. The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. LED flashes green during trip delay and glows red when output de-energizes. Undervoltage, overvoltage, and voltage unbalance must be sensed for continuous trip delay before the relay de-energizes. Re-energization is automatic upon fault correction. The output relay will not energize if a fault condition is sensed as three-phase input voltage is applied. The LED alternately flashes red/green when phase reversal is sensed. Line voltage is selected with the knob, setting the over and undervoltage trip points. The voltage range is automatically selected by the microcontroller.

LED Indicator

Steady green = Energized
Steady red = De-energized (tripped on fault)
Flashing green = Trip delay
Alternate flashing red/green = Phase reversal

特長:

  • Proprietary microcontroller-based circuitry
  • Quick octal 8-pin mounting
  • LED diagnostics
  • Isolated, 10 A, SPDT output contacts
  • Simple three-wire connection for delta or wye systems – no connection to neutral
  • ASME A17.1 Rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41-1991 Level B

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Phase SequenceInput Tolerance (%)Input TypeInput Voltage Maximum (V)Output Load Rating (VA)Output TypeOvervoltage Reset Voltage (%)Overvoltage Trip Voltage (%)StockSamples
カタログ番号入力
電圧 (V)
出力
フォーム
端子タイプ取付け方式寸法重量 (ポンド / g)Input AC Line Frequency (Hz)Input Phase SequenceInput Tolerance (%)Input Type最大入力電圧(V)Output Load Rating (VA)出力タイプOvervoltage Reset Voltage (%)Overvoltage Trip Voltage (%)在庫サンプル
PLMU11 200 - 480 Vac絶縁 SPDTOctal 8-pin plug-inPlug-in socket rated 600V3.03 H x 2.39 W x 1.78 D in. (77 x 60.7 x 45.2 mm)0 Kg50 / 60 ±2; 200 - 240 V ac: 50 / 60; 340 - 420 V ac: 50; 400 - 480 V ac: 60A; B; C±15%3-phase delta or WYE with no connection to neutral55210 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/3 hp @ 250 Vac; 277 Vac maxEnergized when voltages are acceptable-2% of the trip voltage109 - 113% of the adjusted line voltage確認 Order
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。