ACBC シリーズ - Alarm Controller and Battery Charger for pump control panels

シリーズ: ACBC
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
The ACBC-120 is a dual purpose alarm controller/battery charging unit. When there is a loss of 120VAC power, the ACBC-120's primary function as an alarm controller activates. When this power loss occurs, input power is switched to a 12VDC, lead-acid, rechargeable backup battery and a 12VDC alarm consisting of a strobe light and/or a horn is activated. The horn follows a 2 second on/2 second off pattern with a "horn silence" option to turn the sound off. An LED indicator on the unit also signals that the device has entered the alarm mode.

When 120VAC input is present the alarm circuit can be tested and the unit's secondary function as a 12VDC backup battery charger is activated. In fast charge mode, the unit has the capability to source up to 100mA of charging current. However, the device normally charges at a current of 14mA in maintenance mode. The alarm circuit can be tested by pressing the "test" button located on the front of the unit or by activating an external switch via the "alarm contact" pin.

The device has the ability to signal low battery voltage if the voltage drops below 10.5VDC. The device can also detect if no battery is present or if the battery is connected backwards. In either of these cases, the ACBC-120 will signal a battery error and will not attempt to charge.

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Acceptable Battery TypeHumidityInput AC Line Frequency (Hz)Input Current Range (A)Input Tolerance (%)Maximum Input PowerOutput Load Rating (VA)StockCompare
カタログ番号入力
電圧 (V)
出力
フォーム
端子タイプ取付け方式寸法重量 (ポンド / g)Acceptable Battery Type湿度Input AC Line Frequency (Hz)入力電流範囲 (A)Input Tolerance (%)Maximum Input PowerOutput Load Rating (VA)在庫比較する
ACBC-120 120 VacStrobe light / Horn12-pin plug-in; Torque: 20 in-lbs; Wire: 12 - 20 AWG solid or stranded (using SD12-PC socket)Plug-in socket; Surface mount with #8 or #10 screws (using SD12-PC socket)1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm)0 Kg12 V lead-acid rechargeable10 - 95% non-condensing per IEC 68-2-350 / 600.018 (max.); 0.003 (typical)±10%2.4 (max.) (fast charge current); 0.4 (typical) (maintenance charge current)12 Vdc @ 1 A (max.)確認
ACBC-120-SD 120 VacStrobe light / Horn12-pin plug-in; Torque: 20 in-lbs; Wire: 12 - 20 AWG solid or stranded (using SD12-PC socket)Plug-in socket; Surface mount with #8 or #10 screws (using SD12-PC socket)1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm)0 Kg12 V lead-acid rechargeable10 - 95% non-condensing per IEC 68-2-350 / 600.018 (max.); 0.003 (typical)±10%2.4 (max.) (fast charge current); 0.4 (typical) (maintenance charge current)12 Vdc @ 1 A (max.)確認
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。