460 15 100 SLD シリーズ - シールリーク検出器

シリーズ: 460 15 100 SLD
リテルヒューズ サポートへのお問い合わせ
The 460-15-100-SLD is a seal-leak detector to sense seal failures on submersible pumps. A microcontroller-based relay monitors the shaft seal of a submersible pump motor. A resistive probe is installed in the seal cavity. If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity setpoint, the unit will trip and the relay contacts will change state. Output relay logic can be reversed by removing an external jumper. The unit will automatically reset when a fault is cleared.


Catalog #Input
Voltage (V)
Termination TypeMounting MethodDimensionsWeight (lbs/g)HumidityInput AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Protection ClassSense VoltageSensitivity (Ohms)Storage Temperature (F/C)Stock
電圧 (V)
端子タイプ取付け方式寸法重量 (ポンド / g)湿度Input AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Protection ClassSense Voltage感度(オーム)保管温度 (F/C)在庫
460-15-100-SLD 110 - 120 Vac nominalDPST - 2 Form ATorque: 6 in-lbs; Wire: Stranded or solid 12 - 20 AWG35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg10 - 95% non-condensing per IEC 68-2-350 / 60 (50 will increase all delay timers by 20%)2Pilot Duty: 360 VA @ 240 Vac B300; General Purpose: 8 A @ 240 VacIP20; NEMA 1 (finger safe)5 Vdc continuous (probe)4.7 - 100-40° to 80°C (-40° to 176°F)確認