>

ARP シリーズ - 交流リレー

シリーズ: ARP
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED's indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket.


Operation Alternating: When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate.
Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit's input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation.
Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously.
The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Tolerance (%)Isolation Voltage (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Storage Temperature (F/C)StockCompare
Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Tolerance (%)Isolation Voltage (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Storage Temperature (F/C)StockCompare
AR120A-3095 24; 120; 230 VacSPDT; DPDT; cross wired DPDTOctal 8-pin or magnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 6024 V ac: -15% - 20%; 120 and 230 V ac: -20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP23S 24 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-15% - 20%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP41 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP41S 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP42S 120 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP43 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP43S 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP61S 230 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP62S 230 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
ARP63S 230 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)確認
品番 部品名 RoHS 鉛フリー RoHS (2015/ 863/EU) 認証 REACH (SVHC) 適合証明書 ハロゲンフリー REACH (SVHC)
ARP63S ALTERNATING RELAY なし 08/22/2018 なし 08/22/2018 /~/media/images/littelfuse/site-logo/lf_logo.png" alt="Littelfuse Circuit Protection Sensors and Power Control" height ="62" width ="191" />

ARP Series - Alternating Relay

External overview image
Roll Over to Zoom
The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED’s indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket.


Operation Alternating: When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate.
Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit’s input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation.
Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously.
The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Tolerance (%)Isolation Voltage (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Storage Temperature (F/C)StockCompare
Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Tolerance (%)Isolation Voltage (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Storage Temperature (F/C)StockCompare
AR120A-3095 24; 120; 230 VacSPDT; DPDT; cross wired DPDTOctal 8-pin or magnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 6024 V ac: -15% - 20%; 120 and 230 V ac: -20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP23S 24 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-15% - 20%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP41 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP41S 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP42S 120 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP43 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP43S 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP61S 230 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP62S 230 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
ARP63S 230 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60-20% - 10%≥1500 Vrms input to output10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Check
Part # Part Description RoHS Pb-free RoHS (2015/ 863/EU) Certificate REACH (SVHC’s) Declaration Halogen Free REACH (SVHC’s)
ARP63S ALTERNATING RELAY No 08/22/2018 No 08/22/2018 ../../../../../Common
If the product environmental information that you are looking for does not appear in this tab,
please complete the Product Environmental Information Request Form.