Diode Battery Isolators シリーズ - Battery Isolator 200A

シリーズ: Diode Battery Isolators
リテルヒューズ サポートへのお問い合わせ
外観全体画像
マウスオーバーで拡大
For vehicles with two batteries, these devices electrically isolate the batteries to prevent the battery with the higher charge from draining into that with the lower charge. In addition, both batteries can be charged simultaneously from one source.

The amp rating of each item is the maximum alternator rating. Most alternators on new vehicles have an integral electronic voltage regulator that requires the use of the 4-stud battery isolator. The small 4th stud is for connection to a circuit switched by the ignition switch. The newer alternators were first introduced by Delco and are therefore sometimes called 'Delcotron-type alternators'. A 4-stud battery isolator can be used with older pattern alternators (in this case the 4th stud will remain unconnected), but a 3-stud battery isolator cannot be used with the Delcotron-type alternator.

特長:
  • General purpose Battery Isolators for 12-36V DC negative ground systems
  • Electronic components are embedded to give excellent protection from adverse conditions, such as contamination and vibration
  • Integral heat sink provides efficient heat dissipation

Per Leg Ratings
Battery isolators have a 'per leg' rating which indicates the maximum current it can deliver to either battery. All Littelfuse Cole Hersee brand battery isolators have a per leg rating equal to half the alternator rating. For example, the 48051 with a rating of 75A has a per leg rating of 37.5A per leg.

注文情報

品番 Amp
48051 75A Used to isolate medical equipment batteries from vehicle batteries. With Schottky diode, to comply with Federal Spec. KKK-A-1822B
48070 70A Use with alternators that do not have integral electronic voltage regulator
48090 90A Use with alternators that do not have integral electronic voltage regulator
48092 90A For use with Delcotron-type alternators
48120 140A Use with alternators that do not have integral electronic voltage regulator
48122 140A For use with Delcotron-type alternators
48160 200A Use with alternators that do not have integral electronic voltage regulator
48161 250A Used to isolate medical equipment batteries from vehicle batteries. With Schottky diode, to comply with Federal Spec. KKK-A-1822B
48162 200A For use with Delcotron-type alternators

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Current Rating (Continuous) in AmpsVoltage Rating MaxIngress ProtectionOutput TerminalsHousingCompare
カタログ番号アンペアでの定格電流(直流)最大定格電圧保護等級出力端子ハウジング比較する
48051 75Fully SealedTwo 1/4 StudsBlue Heatsink
48051-BX
48051-BX 75Fully SealedBlue Heatsink
48070 7036Fully SealedThree 1/4 StudsBlue Heatsink
48070-BX
48070-BX 7036Fully SealedBlue Heatsink
48090 9036Fully SealedThree 1/4 StudsBlue Heatsink
48090-BX
48090-BX 9036Fully SealedBlue Heatsink
48120 14036Fully SealedThree 5/16 StudsBlue Heatsink
48120-BX
48120-BX 14036Fully SealedBlue Heatsink
48122 14036Fully SealedThree 5/16 Studs and one #10 studBlue Heatsink
48122-BX
48122-BX 14036Fully SealedBlue Heatsink
48160 20036Fully SealedThree 5/16 StudsBlue Heatsink
48160-BX
48160-BX 2036Fully SealedBlue Heatsink
48161 25024Fully SealedThree 5/16 StudsBlue Heatsink
48161-BX
48161-BX 25024Fully SealedBlue Heatsink
48162 20036Fully SealedThree 5/16 Studs and one #10 studBlue Heatsink
48162-BX
48162-BX 20036Fully SealedBlue Heatsink
48092
製造中止:2019 -01-01
Fully SealedThree 1/4 Studs and one #10 stud

pdf icon Battery Isolator Wiring Guide for Delcotron Alternators

IF-128

pdf icon Battery Isolators 2D Prints

Battery Isolator Part Numbers: 48092 48122 48162 48080 48070 48090 48120 48160 48051 48161

製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。