PLR Series – Voltage Monitor シリーズ - Littelfuse PLR Voltage Monitoring Relays Provide Superior Protection

外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The PLR series is a cost-effective, three-phase voltage monitor that prevents three-phase motor startups during adverse voltage conditions. The proper A-B-C sequence must occur in order for the monitor's output contacts to energize. In addition, the relay will not energize when an undervoltage or phase loss condition is present. The PLR series protects a motor against undervoltage operation. The adjustment knob sets the undervoltage trip point.

動作

The output relay is energized and the LED glows when all voltages are acceptable and the phase sequence is correct. Undervoltage must be sensed for a continuous dropout delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied.

Field Adjustment

Turn the adjustment knob fully counterclockwise and apply three-phase power. The LED should be ON. Increase adjustment until the LED goes OFF. Decrease adjustment until LED glows again. If nuisance tripping occurs, decrease the adjustment slightly.

Note: When properly adjusted and operating in an average system, a voltage unbalance of 10 % or more is required for phase loss detection. When a phase is lost while the motor is running, a voltage will be induced into the open phase nearly equal in magnitude to the normal phase-to-phase voltage. This condition is known as regeneration. When regenerated voltages are present, the voltage unbalance during single phasing may not exceed 10 % for some motors. The PLR Series may not provide protection under this condition. For systems that require superior phase loss protection, select the PLMU Series.

特長:

  • Continuous monitoring
  • Industry standard 8-pin octal plug connection
  • LED 表示

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Phase SequenceInput TypeInput Voltage Maximum (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Pull-in Response Time (ms)Storage Temperature (F/C)StockSamplesCompare
カタログ番号入力
電圧 (V)
出力
フォーム
端子タイプ取付け方式寸法重量 (ポンド / g)Input AC Line Frequency (Hz)Input Phase SequenceInput Type最大入力電圧(V)Output Load Rating (VA)出力タイプMax. Output
電圧 (V)
Pull-in Response Time (ms)保管温度 (F/C)在庫サンプル比較する
PLR120A 95 - 140 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral1435 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)確認 Order
PLR240A 190 - 270 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral2705 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)確認 Order
PLR380A 340 - 450 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral4805 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)確認 Order
PLR480A 380 - 500 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 Kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral5305 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)確認 Order
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。