LLC1 Series – Open Board Liquid Level Controls シリーズ - Littelfuse LLC1 Open Board Liquid Level Controls Provide Superior Protection

外観全体画像
マウスオーバーで拡大
免責事項

リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください(自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません)。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。

The LLC1 series is a single-probe, conductive liquid level control designed for OEM equipment and commercial appliance applications. This unit may be ordered with fixed-fill or fixed-drain operation. A time delay (1-60 s) prevents rapid cycling of the output relay. On adjustable units, the sensitivity adjustment allows accurate level sensing while ignoring foaming agents and floating debris. Isolated ac voltage is provided at the probe to prevent electrolysis. A trickle current of less than 1 mA determines the presence or absence of liquid between the probe and common. The LLC1 series printed circuit board is conformally coated to resist moisture and corrosion.

動作
Drain (pump-down mode): When the liquid level rises and touches the probe, a fixed time delay begins. This time delay prevents rapid cycling of the output relay and its load. At the end of the time delay, the output relay energizes and remains energized until the liquid level falls below the probe. The output relay then de-energizes and remains de-energized until the liquid again touches the probe.

Fill (pump-up mode): When the liquid level falls below the probe, a fixed time delay begins. This time delay prevents rapid cycling of the output relay and its load. At the end of the time delay, the output relay energizes and remains energized until the liquid level rises and touches the probe. The output relay then de-energizes and remains de-energized until the liquid level again falls below the probe.

特長:

  • Isolated ac voltage on probe
  • Open PCB design
  • Conformally coated PCB
  • Sensitivity adjustment

商品仕様、各種認証情報、在庫のご確認、部品のご注文は以下をご覧ください

Catalog #Input
Voltage (V)
Output
Form
Time Delay RangeTermination TypeMounting MethodDimensionsWeight (lbs/g)Control TypeInput AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)Output TypeSense Resistance ToleranceSense Resistance (Ohms)Sense VoltageStockSamplesCompare
カタログ番号入力
電圧 (V)
出力
フォーム
遅延時間の設定範囲端子タイプ取付け方式寸法重量 (ポンド / g)Control TypeInput AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)出力タイプSense Resistance Tolerance感知抵抗(オーム)Sense Voltage在庫サンプル比較する
LLC14A1AX 120 VacNon-isolated SPST and isolated SPDT contacts1 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC14A5AX 120 VacNon-isolated SPST and isolated SPDT contacts5 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC14B15AX 120 VacNon-isolated SPST and isolated SPDT contacts15 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC14B1AX 120 VacNon-isolated SPST and isolated SPDT contacts1 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC14B60AX 120 VacNon-isolated SPST and isolated SPDT contacts60 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC16A25AX 230 VacNon-isolated SPST and isolated SPDT contacts25 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
LLC16A3AX 230 VacNon-isolated SPST and isolated SPDT contacts3 s fixed0.25 in. (6.3 mm) male quick connect terminals0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)3.5 H x 2.75 W x 2 D in. (88.9 x 69.9 x 50.9 mm)0 KgON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 250Low voltage AC between probe and common; isolated from input and ouput確認 Order
製品環境情報を請求される場合は、製品環境情報リクエストフォームをご利用ください。

  • Showing 2 items