免責事項
リテルヒューズの製品は、所定のリテルヒューズ製品文書に明記した用途で使用することを目的として設計されており、それ以外の用途を目的としたものではありません。製品文書にない用途でのご使用はお控えください（自動車関連、軍関連、航空宇宙産業、医療、救命、生命維持、原子力施設、人体への外科的移植用器具のほか、製品が所望の稼働状態にならないことによって怪我、死亡、物的損害を招く恐れのあるアプリケーションすべてを含みますが、これらに限定されません）。該当するリテルヒューズの文書にない用途で製品を使用された場合、リテルヒューズの保証は無効となります。リテルヒューズは、該当するリテルヒューズの文書に明記されていない用途で使用された製品に関する申し立て、および損害に対して責任を負いかねます。リテルヒューズとの特段の合意がない限り、リテルヒューズの製品の販売および使用にはリテルヒューズ販売契約条件が適用されます。「リテルヒューズ」とは、Littelfuse, Inc. およびそのすべての関連法人の総称です。
The Littelfuse models 111P (115 volt, ⅓ to 1hp); 233P-1.5 (230 volt, ⅓ to 1.5hp); and 233P (230 volt, ⅓ to 3hp) are single-phase pump monitors used in a variety of applications to protect from dry-well, dead-head, jammed impeller, rapid-cycling, overvoltage, and undervoltage conditions.
動作
A calibration adjustment allows the unit to be calibrated to your specific pumping applications, which reduces the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitor the incoming power for fluctuations, overcurrent, and undercurrent conditions. When an abnormality, such as loss of suction, is detected, the product deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the relay reactivates its output relay and turns the pump back on. The infrared LED communicates with a hand-held diagnostics tool called the Informer* (sold separately). The Informer displays parameters including calibration points, trip points, run time and last faults.
There are special considerations for pump cables larger than #10 AWG: In some cases where larger motors are installed with deep-set pumps, pump cables are used that exceed the relay's terminal size. In these conditions, a short splice of #10 AWG or #12 AWG may be a solution at the control box. Note: All local, state, and national electric codes should be followed when applying this solution.
Note: The description and operations apply to Littelfuse models 111P (115 V, ⅓ to 1 hp); 233P-1.5 (230 V, ⅓ to 1.5 hp); and 233P (230 V, ⅓ to 3 hp). These models have a sensitivity adjustment for the dry-well trip point. After calibration is complete, you can adjust the sensitivity for the dry-well/dead-head trip point from 70-90 % of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, you increase the sensitivity closer to the 90 % mark, or if you have a very heavy producing well, you should decrease the sensitivity around the 70 % mark.
*Informer: A hand-held diagnostic tool that uses an infrared receiver to access information that can be helpful for troubleshooting the system.
特長：
- Proprietary microcontroller-based circuitry
- Onboard calibration process
- Onboard sensitivity adjustment